Description
Features:
Unique condenser design, powerful remote lighting, high-power handheld miner’s lamp, range up to 300 meters.
L2 super bright LED, lamp bead life can reach 100 million hours.
6-10 hours of runtime
3 modes of lighting, high, low, flashing, you can choose different lighting methods.
Built-in rechargeable battery, no need to replace, protect the environment.
With a USB interface, it is not only used as a lighting device, but also as a mobile power supply.
Install the folding tripod, the rotating bracket can reach different irradiation directions for hands-free operation.
specification:
Material: PVC
Lamp beads: 1 x L2
Power interface: 1 * USB charging port
Battery: Built-in lithium battery (4000 mah)
Packing size: 20*20*12cm
The package includes:
1 x handheld headlight
1 x tripod
1 x USB cable
|
|
1. Instructions for use 1. Check the battery: make sure the battery is charged and installed in the correct direction as a flashlight; 2. When the flashlight is in use, choose according to the voltage and battery requirements of the flashlight, and do not use it indiscriminately to prevent burnout of the circuit board. Do not use batteries of different models and voltages at the same time; 3. In use, when the brightness of the flashlight changes significantly, turn off the flashlight to prevent over-discharge of the battery and charge it in time; pay attention to the waterproof, moisture-proof, and drop-proof of the battery. When charging, according to the charging speed of the charger, After the indicator light changes, take it out in time and don’t overshoot; 4. If the battery is not used for a long time, the battery should be fully charged and kept. Normally, it should be charged and discharged once in about three months to avoid chemical corrosion; 5. Keep the inner wall of the lamp cup clean. Never wipe it with your hands or hard objects. To clear the fingerprints on the lens, you can wipe it gently with a cotton swab dipped in lens cleaner; 6. Do not keep the flashlight in contact with sunlight, water, chemicals and corrosive gases for a long time to avoid damage to the flashlight; 7. Non-professionals should not disassemble the flashlight to prevent damage to the circuit board. 2. Matters needing attention 1. Do not illuminate the eyes directly to avoid damage to the eyes; 2. Do not use overvoltage, the voltage should not exceed 4.2V, and the battery should not be reversed, otherwise the circuit board will be burned; 3. When charging, please look for the positive and negative poles of the charger, do not overcharge or over discharge the battery, so as not to damage the service life of the battery (charging time is generally 5-8 hours) 4. When using a flashlight, check that the screw threads are not loose, otherwise it may cause the goods to be dark and light; 5. The flashlight should not be placed in the sun or high temperature environment. After stopping use, please take out the battery and fully charge it and store it in a cool and dry place; 6. The company’s flashlight has the ability to waterproof life, generally rain will not cause problems, but does not have the diving function, please do not carry this flashlight for diving or put it in the basin or bathtub for a long time; 7. In order to keep the O-ring (sealing rubber ring) and thread rotating smoothly, please wipe Vaseline oil on the surface 2-3 times a year. Three, charging instructions Insufficiency should be replenished in time to avoid affecting battery life. The battery should be charged during long-term storage. |
Reviews
There are no reviews yet.